flash-ui

Enables the Flash user interface (UI) on a device. The following rules apply:

• If flash-ui and https server are enabled, the Flash UI is reachable on port 10443.
• If flash-ui and http server are enabled, the Flash UI is reachable on port 10080.

Supported on the following devices:

• Service platforms: NX5500, NX7500, NX9500, NX9600
• Virtual platforms: CX9000, VX9000

Syntax

flash-ui

no flash-ui

Parameters

None

Examples

The following example shows the current settings for the management policy named test-cw. In this example, flash-ui is not enabled, which is the default setting.

vx9000-3C6F18#
vx9000-3C6F18#config
Enter configuration commands, one per line.  End with CNTL/Z.
vx9000-3C6F18(config)#management-policy test-cw
vx9000-3C6F18(config-management-policy-test-cw)#show context
management-policy test-cw
 no telnet
 no http server
 nova
 no flash-ui
 https server
 rest-server
 ssh
 ssh enable-weak-mac-algo 1
vx9000-3C6F18(config-management-policy-test-cw)#

In the following example, flash-ui is first enabled, then it is disabled using the no command.

vx9000-3C6F18(config)#management-policy test-cw
vx9000-3C6F18(config-management-policy-test-cw)#flash-ui
vx9000-3C6F18(config-management-policy-test-cw)#show context
management-policy test-cw
 no telnet
 no http server
 nova
 flash-ui
 https server
 rest-server
 ssh
 ssh enable-weak-mac-algo 1
vx9000-3C6F18(config-management-policy-test-cw)#no flash-ui
vx9000-3C6F18(config-management-policy-test-cw)#show context
management-policy test-cw
 no telnet
 no http server
 nova
 no flash-ui
 https server
 rest-server
 ssh
 ssh enable-weak-mac-algo 1
vx9000-3C6F18(config-management-policy-test-cw)#

In the following example, flash-ui and https server are enabled. In this case, the Flash UI is reachable on port 10443.

vx9000-3C6F18(config-management-policy-test-cw)#flash-ui
vx9000-3C6F18(config-management-policy-test-cw)#show context
management-policy test-cw
 no telnet
 no http server
 nova
 flash-ui
 https server
 rest-server
 ssh
 ssh enable-weak-mac-algo 1
vx9000-3C6F18(config-management-policy-test-cw)#

In the following example, flash-ui and http server are enabled. In this case, the Flash UI is reachable on port 10080.

vx9000-3C6F18(config-management-policy-test-cw)#no flash-ui
vx9000-3C6F18(config-management-policy-test-cw)#http server
vx9000-3C6F18(config-management-policy-test-cw)#no https server
vx9000-3C6F18(config-management-policy-test-cw)#flash-ui
vx9000-3C6F18(config-management-policy-test-cw)#show context
management-policy test-cw
 no telnet
 http server
 nova
 flash-ui
 no https server
 rest-server
 ssh
 ssh enable-weak-mac-algo 1
vx9000-3C6F18(config-management-policy-test-cw)#

Related commands